{"id":60,"date":"2015-10-30T22:24:18","date_gmt":"2015-10-31T05:24:18","guid":{"rendered":"http:\/\/cruiser54.com\/?p=60"},"modified":"2016-01-31T13:27:32","modified_gmt":"2016-01-31T20:27:32","slug":"throttle-body-and-iac-cleaning","status":"publish","type":"post","link":"https:\/\/cruiser54.com\/?p=60","title":{"rendered":"Throttle Body and IAC Cleaning"},"content":{"rendered":"


\nOriginally by TJWalker of CherokeeForum & JeepForum<\/strong><\/em><\/p>\n

\"dirty<\/a><\/p>\n

The Idle Air Control (IAC) is mounted on the back of the throttle body (front for ’87-’90).<\/p>\n

The valve controls the idle speed of the engine by controlling the amount of air flowing through the air control passage. It consists of a stepper motor that moves a pintle shaped plunger in and out of the air control passage. When the valve plunger is retracted, the air control passage flows more air which raises the idle speed. When the valve plunger is extended, the air control passage flows less air which lowers the idle speed.<\/p>\n

Over time and miles, the IAC can get carboned up which can have an adverse affect on idle quality. Cleaning the IAC may restore proper function and is an easy procedure to perform and good preventive maintenance so it is never a bad idea. This should be part of a normal tune-up procedure and whenever idle\/stalling issues are present.<\/p>\n

CLEANING THE JEEP 4.0 IDLE AIR CONTROL<\/strong><\/p>\n

\"dirty<\/a><\/p>\n

    \n
  1. Remove the air filter cover, associated hoses and the rubber boot that goes from the air filter cover to the throttle body. Remove the IAC with a Torx driver (2 bolts; one can be kind of hard to get to). On ’91 and later, it may be easier to just remove the whole throttle body. Be sure to use a new throttle body to manifold gasket when reinstalling.<\/li>\n
  2. \u201cGently\u201d wiggle out the IAC from the throttle body. Gasket\/O-ring on the IAC can be re-used if it is not damaged<\/li>\n
  3. Clean the IAC with a spray can of throttle body cleaner; inexpensive and available at any place that sells auto parts. Throttle body cleaner is recommended rather than carburetor cleaner as it is less harsh, safe for throttle body coatings and oxygen sensors. Use cleaner, a rag and a toothbrush and or Q-Tips. Be gentle; don\u2019t twist or pull on the pintle that protrudes from the IAC as it is fragile and you could damage it.<\/li>\n
  4. Thoroughly spray clean and flush where the IAC seats in the throttle body with the same spray cleaner.<\/li>\n
  5. It is also a good idea to clean the entire throttle body bore itself, the butterfly valve inside of the throttle body and it\u2019s edges, and all associated linkage as long as you have things disassembled.<\/li>\n<\/ol>\n

    \"dirty<\/a><\/p>\n

    Revised 1-31-2016<\/p>\n","protected":false},"excerpt":{"rendered":"

    Originally by TJWalker of CherokeeForum & JeepForum The Idle Air Control (IAC) is mounted on the back of the throttle body (front for ’87-’90). The valve controls the idle speed of the engine by controlling the amount of air flowing through the air control passage. It consists of a stepper motor that moves a pintle … Continue reading Throttle Body and IAC Cleaning<\/span> →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[2],"tags":[],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p80Oju-Y","_links":{"self":[{"href":"https:\/\/cruiser54.com\/index.php?rest_route=\/wp\/v2\/posts\/60"}],"collection":[{"href":"https:\/\/cruiser54.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cruiser54.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cruiser54.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/cruiser54.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=60"}],"version-history":[{"count":4,"href":"https:\/\/cruiser54.com\/index.php?rest_route=\/wp\/v2\/posts\/60\/revisions"}],"predecessor-version":[{"id":331,"href":"https:\/\/cruiser54.com\/index.php?rest_route=\/wp\/v2\/posts\/60\/revisions\/331"}],"wp:attachment":[{"href":"https:\/\/cruiser54.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=60"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cruiser54.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=60"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cruiser54.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=60"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}